1 / 2
M8-1.0mm nut and bolt
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I created a new M8 nut and bolt. You can use a slicer for the shorter bolt.
- Rating
- 5 / 5
- Likes
- 11
- Downloads
- 366
- Makes
- 3
- Views
- 895
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
STL Models
M8x1.0mm nut and bolt
- Bolt
- 20mm full thread
- Nut
- Normal tolerance
Gcode and Print
I put an example Gcode for a bolt and a nut in one print, but I WOULD HIGHLY RECOMMEND TUNING SLICER YOURSELF to get the best results for your purpose.
You may want to have more perimeters, print them individually to avoid stringing, more infill to give more strength.
I used PETG for the test print. PLA should work as well.
Thank you!
I would really appreciate you if you can support me !!!
Other models