GRATKIT cardboard adapter spool
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
a GRATKIT cardboard adapter spool
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 38
- Makes
- 0
- Views
- 328
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
In order to use GRATKIT cardboard spools in the AMS, the CBAS series has been expanded.
The spool needs around 160 grams of filament with 15% infill, making it not lightweight but rather sturdy and smooth-running. So far it has always fit perfectly into the spools core.
Prints tested with:
0.4 nozzle, 3 walls, 15% infill, 0.2 layer height, no supports
Assembly
To assemble, first remove a cardboard side of the GRATKIT spool and replace it with a printed half, some of the glue residue may need to be removed. Hold the spool and turn it over, then remove the other side, now screw the halves together until they are tight.
It's best to wrap the filament with painter's tape beforehand to prevent it from unwinding on its own.
Explore the latest models and more on Makerworld!