Craftsman Universal Pass Thru Socket Set Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
~~THIS IS IN BETA~~ ~~SEE DESCRIPTION~~ ~~INSTRUCTIONS IN DESCRIPTION~~
- Rating
- 0 / 5
- Likes
- 17
- Downloads
- 127
- Makes
- 2
- Views
- 1,006
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
The picture and files I uploaded are what I have printed and have included pictures, so that part is ready to use.
The reason it's in beta is because I will have to make the holder for the smaller wrench and the carrier for those sockets as well.
Before printing any of the carriers, print the "3-4 Socket Holder_TESTER", (¾" inch, can't use special characters in description of STL naming) that I have included to make sure your printer can dimensionally print to the correct size, (or maybe my printer is wrong and I scaled it to that, haha, maybe an oops), before wasting a lot of material. If the test print goes okay, then go ahead and print the Metric set.
When I finish the Imperial/SAE Holders I will also include a test file for that as well.
~~~EDIT~~~: Imperial set has been uploaded, woot.
For me, all fits well, as you can see in the photos, and they snap into place nicely, hopefully they do for you too :).
INSTRUCTIONS:
Print with at least 50% infill, can be slightly flexy if not. For me at least, I wanted more strength due to it being bounced around in my tool box.
Use mouse ears or a brim to stop warping, there are some sharp corners.
The filament type I used was PLA, which seems okay, but maybe use a stronger material like PETG, I just didn't have any on hand.
~~~EDIT~~~: It seems this may work with Duralast, Crescent, and possibly other similar designs, but I have no way of testing. If it works for you with an alternative brand, let me know :)