IKEA table corner lip stoppers
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mount to the corners of your lack - or any other - table to add a 1mm lip
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 15
- Makes
- 0
- Views
- 142
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial
Mount to the corners of your lack table to add a 10mm lip to your table on its corners.
Extends 20mm in either direction. Mounts either with 1 x ~#8 fastener and/or superglue.
My use was to stop a homemade cardboard enclosure from sliding off table.
I printed in PETG but i imagine PLA would work just as well if you weren't holding too much back with it.
__________
Use 4 x back for normal use. It is essentially the “standard” version.
Use 2 x back and 1 x of the other two models if you need to allow clearance on the front side, i.e. for a door swinging out. The front panel of my cardboard enclosure does this, so that's why I made the 2 other models.
__________
Let me know if you want the .f3d files and i can upload :)