1 / 4
EVA 2.4 combined filament sensor and filament cutter — image 1
1 / 4

EVA 2.4 combined filament sensor and filament cutter

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Filament sensor (mechanical) and cutter to suit eva 2.4 and LGX lite extruder

Rating
0 / 5
Likes
12
Downloads
52
Makes
0
Views
1,147
Reviews
0

Updated at source:

Model information

License
GNU Lesser General Public License

This toolhead  filament cutter and sensor for EVA 2.4 with LGX lite

Requires:

1 x 4mm ball bearing
2 x m3 nut (1 for cutting face 1 for spring tension)
1 x #17 craft blade
2 x M5 bolts + nylock nuts
1 x mouse button
hot glue ideally to secure switch and connector
1 x JST XH 3-pin male header 
M3 tap
Epoxy glue for blade
Something to cut the blade down 
M3 Heat set inserts x 4
1 x Pen sprig
bunch of m3 bolts assorted sizes
m3 washer to go between lever and spring

top and bottom lever should be rotated so they are flat on the bed. You do need support on. but you can block some of it out on the bottom section 

i printed in petg 0.2 layer height 0.4 line width

if you need to edit design here is link to tinkercad so you can tweak as required

https://www.tinkercad.com/things/39X3LkbiWIc-copy-of-eva-24-filament-cutter-and-filament-sensor?sharecode=UktHVt3ucBcFMHz1ZTN4Gwv7BM_8sXxIwQ2gXBfnKvI

Tags