Cream whipper to Intertap adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Adapter to use an Intertap stout nozzle as a cream whipper attachment.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 58
- Makes
- 0
- Views
- 533
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial
As there are no cheap (< 50 bucks) nitro cold brew systems out there, I decided to modify my cream whipper to do the job…
This adapter allows you to mount an intertap/nukatap stout nozzle onto a standard cream whipper (e.g. iSi, Ico, …).
To charge the whipper with iSi N2 capsules, I use the following part by Michael Pesek:
https://www.printables.com/model/419961-isi-nitro-cartridge-reduction
Replacement Intertap stout nozzles are available for around 10€ each:
https://www.amazon.de/intertap-Edelstahl-Stout-Auslauf/dp/B07Y237CB4
(You don't need the seperate O-ring set.)
Printing & Postprocessing:
If the threads are too tight, scale the model by 103% in X & Y direction. The scaling value may vary by your specific printer model and filament.
Leave Z at 100%.
Make sure the inner chamfer on the base (where the part screws onto the whipper valve) is smooth. Use a 90° countersink to smooth it out if needed.