Cream whipper to Intertap adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
As there are no cheap (< 50 bucks) nitro cold brew systems out there, I decided to modify my cream whipper to do the job…
This adapter allows you to mount an intertap/nukatap stout nozzle onto a standard cream whipper (e.g. iSi, Ico, …).
To charge the whipper with iSi N2 capsules, I use the following part by Michael Pesek:
https://www.printables.com/model/419961-isi-nitro-cartridge-reduction
Replacement Intertap stout nozzles are available for around 10€ each:
https://www.amazon.de/intertap-Edelstahl-Stout-Auslauf/dp/B07Y237CB4
(You don't need the seperate O-ring set.)
Printing & Postprocessing:
If the threads are too tight, scale the model by 103% in X & Y direction. The scaling value may vary by your specific printer model and filament.
Leave Z at 100%.
Make sure the inner chamfer on the base (where the part screws onto the whipper valve) is smooth. Use a 90° countersink to smooth it out if needed.