1 / 3
Hiprecy Leo (1S) Part Cooling Ducts
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A better part cooling duct set for the Hiprecy Leo (1S).
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 17
- Makes
- 0
- Views
- 112
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
An upgraded part cooling duct for the Hiprecy Leo or Leo 1S printers. As stated on the original model's page, the stock one just directs the air to the heatblock, which is essentially useless. With these ducts you can print nicer overhangs.
I recommend printing this with the following settings and materials:
- ABS (or ASA) if you plan to print anything hi-temp (PETG will do if you plan to only print PLA and/or PETG)
- 100% infill to make the part sturdier
- I recommend printing the ducts in the orientation as per the last photo, supports are optional but highly recommended (tree preferably)