Swivel Box for Ruthex Drills
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Small and handy box to store the Ruthex drills for heat set inserts.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 31
- Makes
- 0
- Views
- 285
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial
This is a simple swivel box for the Ruthex drills they offer sized to match their heatset inserts.
Print in the orientation provided, available as stl and 3mf.
The holder will lock into place in it's closed position and is limited to swivel out 90° max.
It's two parts that are assembled by flexing the frame a bit and putting the holder inside.
You can print both without any support. The pegs on the holder will have a bit of filament drooping but you can simply cut that off and it will fit perfectly fine and it not visible at any time when assembled.
The Ruthex logo on the inner piece of the frame and the numbering are added as shallow extrude so that you can color them in bambu or orca slicer using the bucket tool.
The numbering is not according to the diameter but the insert they are for. ( 2 = M2 insert, 6 = M6 insert, etc.)