Billy IKEA Bookshelf invisible LED-holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Hello, I have designed a strip to hide LEDs on the Billy bookshelf. You have to be careful: the shelves that you can…
- Rating
- 0 / 5
- Likes
- 31
- Downloads
- 86
- Makes
- 0
- Views
- 1,158
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Share Alike
Hello,
I have designed a strip to hide LEDs on the Billy bookshelf.
You have to be careful: the shelves that you can position yourself are slightly thicker than the 3 shelves that are fixed.
This design is intended for the shelves.
if you want to mount the bars on the fixed boards, you have to shorten them by 0.1 mm in the y direction - otherwise they are not fixed and will slip a little, but still hold.
i have left some space in the x direction so that you can glue the strip to the right edge. if you want to use the full length of the boards, you have to stretch 0.4 mm in the x direction.
my bambu fits 256mm wide - that's why i had to print 3 of them for a shelf. you will probably have to adjust the length to your own board and print several pieces.
if you have any further questions, please feel free to contact me. otherwise, happy printing :)
Print Settings
Printer Brand:
Bambulabs
Printer:
Bambu X1C
Rafts:
No
Supports:
No
Infill:
10%
Filament:
Overture PLA/PETGwhite
Category: Decor