1 / 5
Sovol SV07/SV07+ 5015 Part Fan Duct — image 1
1 / 5

Sovol SV07/SV07+ 5015 Part Fan Duct

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Part fan duct for Sovol SV07/SV07+ that supports 5015 blower. Should also work with SV06+.

Rating
5 / 5
Likes
49
Downloads
286
Makes
7
Views
2,373
Reviews
5

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

A 5015 part fan duct for the Sovol SV07/SV07+ that should work with the SV06+.   This duct mounts on the front of the extruder stepper motor and will not interfere with the auxiliary cooling fan on the back of the gantry.  It also has a channel to route wires cleanly away from the front of the carriage assembly.

Requires:

  • 4x M3x20 screw (2 to mount fan, 2 to mount to extruder - note: longer than standard extruder screws)
  • 2x M3 nut
  • 24v 5015 Blower with JST 1.25mm connector 
    • I recommend buying pre-terminated wires and soldering on a male JST XH 2.54mm  (standard fan) connector onto a wire with a female JST 1.25mm connector.   This will allow you to change fans in the future without having to redo wiring.  This is what I used:  https://www.amazon.com/dp/B013JRWCBU/

I printed in PETG with organic supports.

 

Tags