1 / 6
Air Intake and shields for Comgrow laser cutter cover — image 1
1 / 6

Air Intake and shields for Comgrow laser cutter cover

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

An Air Intake to help pull air across and out of a Comgrow laser cutter cover. This allows you to keep the cover zipped.

Rating
0 / 5
Likes
6
Downloads
20
Makes
0
Views
212
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

A three-part air intake to be used with a Comgrow laser cutter cover.

This allows good intake air to come from the front right of the enclosure and get pulled across the laser bed to the back right exaust port.  Allowing the cover to be fully zipped, without the fan pulling in the cover, while also blocking the stray laser from being able to escape out the side using the two sheilds to the left and right of the intake, since the cover will slightly raise on the side.

(could likely be combined to a single part, but would make it harder to print without supports)

Tags