1 / 5
Exhaust port and adapter for BOFA PrintPro 2 — image 1
1 / 5

Exhaust port and adapter for BOFA PrintPro 2

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

I migrated from a simple exhaust fan to a BOFA PrintPro 2 filtration system and needed a port/adapter.

Rating
0 / 5
Likes
7
Downloads
24
Makes
0
Views
396
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

My print is in a bedroom/office and not close to a window for exhausting. I originally built a simple temp controlled exhaust fan, but subsequently decided to install a BOFA Print Pro 2 to better control fumes and particulate. I used the same upper back panel STEP file to remix it with an exhaust port. I made the port size generic and decided to add an interconnect adapter to get it to whatever size I needed, in this case the PrintPro 2 exhaust pipe at 52mm. I didn't want to restrict air flow, so I made to insert into the adapter pipe. I just used leftover Polymaker PETG using Input Shaper at .32 speed. I used organic supports and gyroid for the back plate and no supports gyroid for the adapter.

Tags