Exhaust port and adapter for BOFA PrintPro 2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I migrated from a simple exhaust fan to a BOFA PrintPro 2 filtration system and needed a port/adapter.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 396
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
My print is in a bedroom/office and not close to a window for exhausting. I originally built a simple temp controlled exhaust fan, but subsequently decided to install a BOFA Print Pro 2 to better control fumes and particulate. I used the same upper back panel STEP file to remix it with an exhaust port. I made the port size generic and decided to add an interconnect adapter to get it to whatever size I needed, in this case the PrintPro 2 exhaust pipe at 52mm. I didn't want to restrict air flow, so I made to insert into the adapter pipe. I just used leftover Polymaker PETG using Input Shaper at .32 speed. I used organic supports and gyroid for the back plate and no supports gyroid for the adapter.