Whiteboard Holder / Bracket / Wallmount - "Magnetoplan"
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Updated Version v1.3 for "Magnetoplan Design-Whiteboard CC"
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 77
- Makes
- 0
- Views
- 326
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Wall-mounted
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A nice wallmount holder designed for the “Magnetoplan Design Whiteboard CC” whiteboards.
Printer Brand:
Prusa
Printer:
I3 MK3S+
Rafts:
No
Supports:
Yes
Resolution:
0.4 Nozzle
Infill:
25%
Layer height:
0,20 mm
Used Filament:
PET-G Black
Model scale:
1:1
________________________________________________________________________________________________________________
To achieve optimal results I recommend to set your printer to 7x7 mesh bed leveling.
Supports are required and already included in the GCode-File. You can use M4x45 screws to mount the brackets on the wall. There is an easy acces for the screwdriver.
It is of significant importance to print the holders in the side position so that the force transmission in the pulling direction takes place along the grain direction.
No liability is accepted for incorrect assembly and improper use. Use at your own risk! But it works fine when you do it right.
<3 thx
Serg.G