1 / 2
Cr-10 Y belt tensioner plate — image 1
1 / 2

Cr-10 Y belt tensioner plate

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

V2 printed with petg, 5 walls and 30% infill. Seems successful so far.

Rating
0 / 5
Likes
14
Downloads
69
Makes
0
Views
609
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

Y axis belt tensioning bracket to aid with installation of my dual Y motor mod.

Re-uses all the original hardware with the exception of 2 m3x30 bolts and 2 m3 nuts

For the belt clamp please visit https://www.thingiverse.com/thing:4243512/files and grab file: 2_TensionerBlockV3.stl. This design only exists courtesy of kevinakasam, I would like to make sure he gets the credit due for the idea.

With this bracket, properly tensioned (much looser than I would have guessed it needed to be), along with the dual y mod, I was able to slowly crank the acceleration up to 50,000mm/s @300mm/s. Much simpler to tension than the standard zip-tie method. If you decide to try this out, PLEASE update me on any failures or room for improvement.

v2- seems successful. Got a 20k accel benchy done in roughly 26 minutes with a single layer shift. 

Tags