Cr-10 Y belt tensioner plate
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
V2 printed with petg, 5 walls and 30% infill. Seems successful so far.
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 69
- Wydruki
- 0
- Wyświetlenia
- 608
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Y axis belt tensioning bracket to aid with installation of my dual Y motor mod.
Re-uses all the original hardware with the exception of 2 m3x30 bolts and 2 m3 nuts
For the belt clamp please visit https://www.thingiverse.com/thing:4243512/files and grab file: 2_TensionerBlockV3.stl. This design only exists courtesy of kevinakasam, I would like to make sure he gets the credit due for the idea.
With this bracket, properly tensioned (much looser than I would have guessed it needed to be), along with the dual y mod, I was able to slowly crank the acceleration up to 50,000mm/s @300mm/s. Much simpler to tension than the standard zip-tie method. If you decide to try this out, PLEASE update me on any failures or room for improvement.
v2- seems successful. Got a 20k accel benchy done in roughly 26 minutes with a single layer shift.