1 / 1
Prusa Original Enclosure Single Foot Bracket
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Individual feet for supporting the printer, minimizing resonance, and reducing noise.
- Rating
- 4.893 / 5
- Likes
- 151
- Downloads
- 524
- Makes
- 27
- Views
- 2,027
- Reviews
- 28
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- GNU General Public License v3.0
Use M3x30mm screws instead of M3x20mm screws when fastening the anti-slip dampers. Insert the M3 nut into the foot. Screw four printed feet onto the protruding threads from the bottom of the enclosure, and affix anti-vibration pads. The feet are taller by 1mm, matching the thickness of the sheet metal, ensuring a level floor.
You will need:
4x M3x30 screws
4x M3 nut