1 / 2
S1 Pro Brace Redesign
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Increase your Ender 3 S1/S1 Pro's stiffness by adding this simple modification.
- Rating
- 5 / 5
- Likes
- 29
- Downloads
- 148
- Makes
- 2
- Views
- 1,042
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Public Domain
Simple cheap mod for your S1/S1 pro.
Required Hardware:
-All stock bolts are replaced by M4x45 Bolts.
-You will need two 3/8th inch by 24 inch rods (I purchased these from my local hardware store for $3 a piece)
-Eight 3/8th inch nuts
-I didn't have any washers on hand, but I'd recommend putting some washers as well.
Print requirements:
-At minimum 4 walls
-At minimum 5 top/bottom layers
-At minimum 15% Gyroid infill