Dek and Ball Hockey Sliders for Goalie Pads
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Complete slider kit for Dek and Ball Hockey. Includes all parts, including anchors with customized placement tool.
- Rating
- 0 / 5
- Likes
- 9
- Makes
- 0
- Views
- 1,702
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Indoor Sports
- License
- Standard Digital File License
A friend asked me if I could make these for him and some of his friends, we went through a few iterations regarding dimensions, screw hole sizes, anchors and more, and I felt like the final product deserved to be put online.
The screws we are using are shown in the images, they are Wood Screws diameter #5 and 1/2" length.
Installation instructions:
- Prepare an anchor for each screw hole (About 40 total)
- Make small incisions in the pad where you want the anchors to be inserted.
- Using the "Anchor pusher", push each anchor to the desired position.
- Once each anchor is at the desired position, put your slider on top and start screwing, making sure your screws align with each anchor's hole.
- Show them who's the boss!
I will be uploading updates and alternative parts to this creation as I gather more feedback or special requests!
Printing instructions:
100% infill
I recommend 0.2mm layers and 0.48mm line width as this print is low detail and these settings will speed up the whole process.
I also recommend using a brim on every part except the anchors to make sure you end up with a flat bottom surface.
Use the "Mirror" option to print the second curved part.
I've had limited success with PETG, PLA is doing a great job so far according to the feedback I've had.
