717 models
I created this model as a remix of a simple hockey player phone stand that isn't on this website. Creator of original model can be found here .
Print approx. €3.32–€4.05 excl. taxPreliminary estimate for one variant
This case is used to store Bauer Hockey Skates runners. It can also be used for other models of runners like CCM, although True's runners won't fit. Checkout my other models for the TRUE model.
Print approx. €1.13–€1.38 excl. taxPreliminary estimate for one variant
czech national Ice Hockey goalie coaster
Print approx. €3.23–€3.95 excl. taxPreliminary estimate for one variant
This is a remix of user Affordable3D's mini hockey stick model. The original model had a pretty cool curve in the blade of the stick that we had difficulty printing well with supports. This model removes the curve in the blade. We used…
I could not find a standard-sized hockey puck so I made one myself. Infill could be adjusted based on your age and the use of the puck. Print Settings Infill: 100 Supports: None Layer Height: 0.20 Material: Any
Hockey stick wall mount rack. Can fit four sticks. Made to be continuous, so you have more than 4, print more! Countersinks are made for size 12 screws. Update 1.12.2024 - Added a 2 and 3 stick addition to the 4. Cheers
Something I've always wanted to wear during halloween. Friday the 13th The movie Halloween was classic horror with a stunning Jamie Lee Curtis. Micheal Myers is another mask I'd like to have a go at too This is an untested print but looks…
A small (8" or so) hockey stick useful for 12" figures
Simple card display stand for any flat surface (Shelves, Desk, Dresser, etc)
The ice hockey puck was missing in my games collection. Model is scaled down to the diameter of 4 cm. The Czech company Gufex is proud producer of the best ice hockey pucks in the world - www.gufex.cz.
I created a hockey stick protector using the Warrior Sabre Taper Senior Size Hockey Stick. The Print is straight so you have to use a blowdryer to manipulate the model to your stick curve. This enables all stick curves and types of…
Simple Hockeystick keychain. Can easily be edited to add a name or anything else you like. I recommend printing at 40% or higher infill to prevent breakage in your pocket.
I added the v2 stick holder that has a little radius on the inside as recommended by BirchD . I love hockey and I've got a couple sticks from games I've been to, so I needed a way to put them up on the wall. I designed this in Solidworks…
Summary Easy-to-print and without supports printable buddy in the form of a hockey puck. I hope you like it! Requires only 15g of filament (single color)! You find a blank version for own customization of this buddy here . Print no…
You are able to print both with the flat surface down as is with no supports. I was able to add a multicolor inlay with my club's logo in the top with just a single nozzle. I will include the Fusion 360 design if you want to attempt…
Summary: I love air hockey but all the models need hardware and expensive parts so I went to fusion 360 and carefully put together this model so it doesn't need any hardware and fixed it so it can print in multiple parts eliminating…
Hi Brad, I found this awesome helmet over at Grabacad by Kalle K https://grabcad.com/library/68977 I though it would work perfectly for what your after ; ) CHeers Jace Please remember to check the sizing suits your needs and please post…
You can print this fairly easy. Use tinkercad to add any name to the flat surface. Print in ABS or even PLA.
Tabletop or shelf display for your hockey pucks. Designed to showcase the puck upright and with as little distraction as possible Should be ok to print with as little as 5% gyroid infill. No supports necessary.
I saw this somewhere and figured I'd make my own and I made some improvements as well. For starters, there is a plug piece that goes into the stick and then seats up against a shoulder to give you a smooth transition from stick to 3d…
I used an already existing whistle and modified it to have finger grips. I didn't want to have to spend $15-20 for a whistle when I could make one. I couldn't find one like this on printables or thingiverse, so that is why I made this. No…
This is an iteration of a 3D model of a hockey mask I've been working on. I won't be updating the file nor releasing the final version publicly, but I wanted to share my progress. Approximate Model Dimensions: X 6.94 in Y 4.31 in Z 8.56…
This is a replacement puck for the Sportscraft Air Hockey Table. This is modeled after the original round Power PUCK by Sportscraft. My original puck measured 71.90mm in diameter or 2.83 inches and 5.5mm thick. Additional puck shapes are…
The most beautiful trophy in all of sports, the Stanley Cup. Awarded to the NHL Champions. This is a replica model I designed using both OpenSCAD and TinkerCAD. There is a one piece model that includes the base and also separate trophy…
This is a is a simple design of a hockey puck that I made that can be used for street hockey, mini sticks, knee hockey or whatever activity you desire. I printed it with 5 walls and 4 top and bottom layers with high infill and found the…
Printed in PLA, Play finger hockey on your desk! Included are two nets 3 pucks and two sticks. DO NOT SELL Category: Sport & Outdoors
Hello, today I tried to make mini hockey that can be played anywhere and can be easily printed:)
A good indoor game activity which can be played during lock down situation while maintaining the social distance. Felt fabric can be added on a striker base by adhesive like hot glue gun to play smoothly.
A great wall art of a Hockey player. Do not forget to LIKE the model and upload your makes, thanks ! Inspired by a sticker
Printed without top an bottom layers and vase mode (I recommend using a 0.8 mm nozzle)
A replacement puck for a small air hockey table
A hockey stick ornament that can also be printed as earings. With the hole in the top it can be used as an ornament, scaled down for earings or hung off anything you would like. If going small enough for earings you may want a brim on the…
more in depth summery the mask is not completely accurate and if you look it for to long it will being to look like a cheep bootleg, or you will convince yourself into thinking that it looks pretty good replica. its probably some where in…
Very fun Air Hockey model to 3d print and play at home! No supports are required to print this and markers are needed to draw the lines.
More free 3D models here: https://bit.ly/338pjuq
Design Notes: Printable pencil design not included. As uploaded, these parts are designed to fit a standard pencil, scale up or down as appropriate for different size pencils. The attached .3mf file includes all the supports and raft you…
This trainer is modular. Want more links? Print more! The span of each section is a little larger than the bed of my MK3 so each span is split up into 2 sections with connectors held together by M3 screws. The caps have threads build into…
This design is a remix of Metric Maven's Soccer Target over on Maker World: https://makerworld.com/en/models/621959-soccer-target#profileId-546028 These are perfect for dialing in those corner snipes, when printed in TPU these targets are…
I was looking for a small hockey puck stand and I couldn't find one I like so here is one I designed. Recommended print settings: 2 Perimeters/Walls 15 % Infill for better stability PLA/PET No supports needed
holds a hockey puck pretty darn well. No supports required.
A great wall art of a Hockey player. Do not forget to LIKE the model and upload your makes, thanks ! Inspired by a sticker
I fully redesigned the model originally created by Ricor https://www.thingiverse.com/thing:4052094 Features Can be printed vertically, to ensure higher strength Screw holes are "water droplet shaped" to ensure great 3D printing Several…
These targets use 30x10x5mm magnets to attach to a goal frame. There's a small, medium, large, and corner target. (Your mileage may vary on the corner piece, depending on the dimensions and shape of your goal.) Print these on the short…
Display the puck not the holder. This low-profile holder is perfect for mounting hockey pucks to walls or plaques. Features countersunk screw holes for mounting. Designed for Multi-Material printing but this could also be printed with one…
NOT FOR PROFIT. PERSONAL USE ONLY!!! Full size wearable mask from the game (undamaged)! I smoothed out the mkx mask from the game and added in 11/32" sized vent holes and even added 3/16" holes for the rivets! thickness is 3/32" SCALE IS…
Slips over the posts of the goal to prevent metal on metal contact for a goalie's skates. Printed out of TPU 95-A with 25% gyroid infill figuring I'd just print more as they broke but they've held up for two seasons worth of practice.…
this is a easy print hockey puck i suggest adding weight
For those who grew up in the 80's and 90's, I'm sure you will appreciate this. This here is my remodelled replacement for the classic Tabletop Hockey game that when I was a kid, was addicted to, was a great way to get away from the t.v.…
So when I was young I always wanted a table hockey as I found them awesome fun however no one would buy me one so now I have a 3D printer I knew it would be a great challenge to see if I could build a fully 3d printable one and I…
This model is compatible with the lego system.
Loved the original model, but wanted a version without the position letters on them.
Thank you for downloads, likes… Enjoy !
I saw a hockey helmet remix for this awesome model, only to find that nobody had made a stick yet! After spending a few minutes in Blender, I came out with this! It seems to fit quite nicely if your printer tolerances are good enough. The…
Simply hockey puck stand that is a quick print and allows both sides of the puck to be seen. Less than 2hrs to print.
update 5/8/25: new bumper with score keeping, new body with brackets to help hold fans and batteries in place. This is a kit for Alien3d. find all the information here: https://www.alien3d.us/ april-2025 / Designed by Bryan Vines:…
Designed to hold my 6 ice hockey team pucks. Print base only for a 3 puck stand. Add 3 insert for 6 puck pyramidal shape stand. I played with print settings for insert to show infill.
Hockey Stick Assembly 3D Printed Blade and Cap Three Sizes using same shaft size Printed PETG for added shock protection - Also Required Alu Shaft (20x10mm) from Hardware Store M3 Screws and Nut (Optional) Grip Tape (Decathlon)
3D Printed Ice Hockey Puck with Mighty Ducks Logo Textured Wall Surface Printed in PLA - no supports required. Surprisingly glides across tiled surfaces!
I recommend 100% infill in PETG. It's not that much filament.
A complete replacement for the gear-box of Stiga tabletop hockey game. I wasn't completely satisfied with the existing models I could find, so I've made my own from scratch. In my game there are two types of mechanisms: “normal ”and “low…
*** Thanks for checking out this model! If you appreciate what I'm doing, please consider buying me a coffee , and check out my other models ! ********** [Update Nov 11, 2024]: I just created a hard case to store all these figures.…
This is a reproduction of the Champions Hockey League trophy There are two models, one with the logo of the CHL and another without Printing tips: You only need a bit of support for the handles of the trophy
mini hockey sticks right and left hand
Slightly angeled holder for a hockey puck. Files for Inventor included.
This model of soap dish in the shape of a hockey rink is color-change ready (see 3mf file or last picture from slicer). Printing recomendation: 0-1.6mm in white , 1.6-2.0 in blue , 2.0-2.4 in red and rest in white again ;). Also check…
A keychain for all the field hockey players out there. I couldn't find one that was actually of the field hockey variant, I could only find ice hockey sticks, so I made one.
created with PLA, can be printed in TPU(recommended). The print in place version only needs supports on the outer rim, everything else doesn't need supports. If a problem comes up, please comment and make that problem known so that I can…
Plug for sawn off hockey stick. It is not necessary to grind anything. Plug should go on stick freely but it should not come off. Few layers of tape will make it hold forever. Flat surface is great for your number, initials or logo. My…
Great for your hockey fan. Hold your phone, tablet, picture, photo, business card or even hockey card with these engraved hockey pucks. There are two groove widths: 15mm wide or 10mm wide. The larger one holds my iPhone 15 with case…
Modular Mini Stick Holders – Build the Perfect Fit Keep your mini sticks organized and ready to grab with our modular Mini Stick Holders. Designed for flexibility and convenience, each holder is available in configurations that securely…
This gears on the game break quite frequently, I was able to solve the problem buy designing a copy of the injection molded version and converted it to be able to 3d print it. Print with lots perimeters or 100% infill for max strengthen.
My sons Sliding Buckle for his Bauer Hockey Helmet broke and I didn't want to pay $1.99 + $7.99 shipping to replace it. In order for this to work properly you need to feed the band back through the first opening of the buckle to get a…
Easy to print hockey puck display that fits well in any room.
Jason´s hockey mask from movie. Designed in Fusion360 based on face topography. Print with supports and position the mask as you see in last picture. I printed it on smaller scale for a test to not waste time but everything works.…
This model is 3 inches in Diameter and 1 inch tall. its thickness is 0.2 inches and the distance between the removed hexagons is 0.1 Inches. This model was printed in 2 parts and superglued together. I would recommend printing with a…
Tried to model our original crumbling paddle as close as I could. Might rework with a higher poly version (got so caught up in dimensions that I wasn't thinking about it). Infill value might take some experimentation to get the right…
Create your own hockey locker room name plate. For a better look, print with 2 colors, a dark color for the first couple of layers, and white for the rest. Use the Customizer option (thingiverse) to personalize the player name and number.…
I was able to press this one into my Warrior and Bauer sticks. Use a heat gun to extend your stick shaft. Optional use heat glue. I added some channels where the glue can settle. find your specific extension length in the download section…
Made small remix of this hockey puck holder.
Miniatura hokejky ledního hokeje.
🏒 Hockey Garden Gnome – Bring the Ice to Your Garden! ⛸❄ This feisty little gnome is ready to drop the gloves—or at least drop the puck! Whether he's defending the flower bed or checking weeds into the boards, this Hockey Garden Gnome…
Remix of the Canondale helmet holder for larger and heavier helmets. I guess I have a large head. My partner's helmet hung just fine on the original model. Mine, not so much. The first remix is to accommodate big head helmets. The rest of…
I've added a connector to keep the individual stands from moving around. There is a right side, left side and center module allowing you to extend the display as needed. Connectors can be glued in place if you want. I'm working on a riser…
I printed it in three pieces, since I did not own one of these brilliant multi-filament switching devices … yet. But it should be possible to run it on a Prusa with MMU. You do have to adapt the design to accommodate this, though.…
Just a regular hockey puck - with texture
Hanger from a used hockey stick and PET bottle. PET 0.2mm layer, 10 bottom and top layers, 6 perimeters, 50% filling. The right and left sides are the same, or it is possible to mirror the model directly in the slicer. It is necessary to…
I came up with this design after I got a hockey puck from a local team and wanted to wall mount it. Print in your teams' colors to accent! There is a small overhang, but NO supports are required.
A silly 15 min print that can help you kill some time. Rules: Divide your phone area in half per player. Points only count if the puck goes through the short sides. If the puck goes through the long sides put it back in the middle Defend…
Hello all! Here we got the team logo of the german icehockey team “Kölner Haie”. Perfect as a present for a good friend. Have fun with it and make sure to post your makes! :)
I really didn't like the overly large designs out there for hanging hockey sticks. I made this one to be as simple and small as possible. and do so vertically though if you made two you could do it horizontally. Settings PLA+ 40% infill…
Porte médaille avec thème hockey PLA ou PETG Imprimer devant sur le BED
Full scale model inspired by the hockey mask strap connector from Friday the 13th 2009. The model may need supports for SLA/FDM 3D printing! Dimensions: X 2.25144 inches Y 1.62577 inches Z 0.195313 inches FOR PERSONAL USE ONLY. IF YOU…
