1 / 7
Levolor Valance Clips
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Valance clips for Levolor brand blinds.
- Rating
- 5 / 5
- Likes
- 3
- Downloads
- 70
- Makes
- 0
- Views
- 284
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial
A remix of Blademonkey's Levolor valance clips from Thingiverse!
The original model's fasteners were too short, which caused the clip to slip in and out of the notches in the blinds too easily. These were extended, and the overall length was reduced to lessen the amount of wiggle room. These alterations bring it in line with the tolerances and wiggle room of the OEM clips.
STL file is provided (I modified this in Blender) and print profiles for the Bambu Lab X1C have been included as well!
Print settings:
- Material: PLA (this seems to hold it just fine)
- Nozzle: 0.4 mm
- Layer Height: 0.16 mm
- Infill: 100% (alternatively, increase wall number)