1 / 3
Ikea Skadis Lamp
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
My Skadis Lamp model: easy, E27 compatible. Illuminate with simplicity.
- Rating
- 0 / 5
- Likes
- 103
- Downloads
- 257
- Makes
- 2
- Views
- 2,678
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I designed this Skadis lamp to effortlessly brighten my office plants, ensuring easy mounting and assembly.
- Lamp shade is compaitable with the standard E27 bulb sockets
with a thread of 40mm diameter and 2.5mm pitch
(like this one - I chose the "white 2" model) - Skadis mount is 16cm from the skadis board to the lampshade center
- Clamp / Holder (Optional) - There is also an optional holder for strengthening and fixing the lamp in place
Included F3D file for remixing in Fusion 360, for you to edit shade/mount lengths or any other details. Feel free to customize!
The current version of the skadis mount is really ugly, I'll redesign it in the future
Print Settings
Lamp shade
- position - with the narrow side on the print bed
- brim - 10mm width
- filament - I used esun's PETG, with 10% infill - make sure to use a fillament that would sustain the bulb heat
- supports - “from buildplate only” and block all other supports above the lampshade hooks.
- here are some examples:
Skadis mount
- position - longest side on the bed
- brim - 6mm width - not a must, I like to set it for long and narrow parts
- filament - I recommend PETG
- supports - “everywhere” and you can block the tips to prevent supports inside the lamp hooks holes.
- here are some examples:
Special thanks!
to Rod for this IKEA Skadis Hooks model for Fusion 360 - I had to reduce the hooks' face-offset by 0.1mm to make it be inserted a bit easier to the board