1 / 2
1in Dual ball extender
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Ram mount compatible ball extender. Uses an M5 screw for added strength
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 44
- Makes
- 0
- Views
- 278
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution
Compatible with Ram mount B size mounts. Split into 2 parts for easier printing. Uses an M5 screw for added strength.
Included onshape project is all parameter based.
- TotalLength - Total length of the extension. Length is from the top of one ball to the top of the other ball.
- BallDiameter - Diameter of the ball. Ram mount B series is 25.4mm
- StemThickness - Thickness of the extension.
- BallStemOverlap - Percentage that the ball and stem should overlap. You need some amount of overlap in order for the face blend to work for a smooth transition between the ball and stem
- ScrewThickness - How thick the screw you are using is.
- HexNutDiameter - Diameter of the hex nut you are using, measured from edge to edge.
- HexNutTolerance - To make it easier to insert the nut, the hex nut diameter is increased by this much.
- ScrewHeadSizeCount - What kind of screw are you using? If it is a circular screw head use a large count, like 50. Otherwise use whatever sided polygon the screw is
- ScrewHeadDiameter - Diameter of the screw head you are using. Measured from edge to edge
Printed in ABS with a large brim. Use either a M5 screw or threaded rod for added strength
OnShape Link: