1 / 2
1in Dual ball extender
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution
Compatible with Ram mount B size mounts. Split into 2 parts for easier printing. Uses an M5 screw for added strength.
Included onshape project is all parameter based.
- TotalLength - Total length of the extension. Length is from the top of one ball to the top of the other ball.
- BallDiameter - Diameter of the ball. Ram mount B series is 25.4mm
- StemThickness - Thickness of the extension.
- BallStemOverlap - Percentage that the ball and stem should overlap. You need some amount of overlap in order for the face blend to work for a smooth transition between the ball and stem
- ScrewThickness - How thick the screw you are using is.
- HexNutDiameter - Diameter of the hex nut you are using, measured from edge to edge.
- HexNutTolerance - To make it easier to insert the nut, the hex nut diameter is increased by this much.
- ScrewHeadSizeCount - What kind of screw are you using? If it is a circular screw head use a large count, like 50. Otherwise use whatever sided polygon the screw is
- ScrewHeadDiameter - Diameter of the screw head you are using. Measured from edge to edge
Printed in ABS with a large brim. Use either a M5 screw or threaded rod for added strength
OnShape Link: