JNC660 Jump N Carry Charger Plug Repair / Reinforcement
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Typical for these plugs to break. I usually replace the boxes (which I hate) when the recharging port breaks because…
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 25
- Makes
- 0
- Views
- 139
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution
Typical for these plugs to break. I usually replace the boxes (which I hate) when the recharging port breaks because it's not worth it to dismantle the box and find the replacement piece. I printed this to slide over the old broken plug to hold the terminals straight so I could recharge it.
If you want, you can add a dab of super glue around the terminals so they don't push back in.
EDIT: V3 added some walls for the plug to sit into, hopefully it will keep the prongs sturdy. This is for the JNC 660s that have a round hole in the charging port (See picture below).
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
Doesn't Matter
Supports:
No
Infill:
100
Filament:
Sunlu PETGBlack Post-Printing =============




Category: Automotive
