1 / 1
Sovol Filament Dryer Bowden Tube Mod
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A hollow nut and bolt fastener to allow bowden tubes to pass through the Sovol SH01 Filament Dryer.
- Rating
- 5 / 5
- Likes
- 22
- Downloads
- 192
- Makes
- 3
- Views
- 1,020
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Created for the Sovol SH01 Filament Dryer to allow smoother filament feeding through the top outputs.
A simple M6 nut and bolt fastener that is hollowed to accept 4mm bowden tube pass through (1.75mm filament).
The tube is press-fit, but your tolerances may vary. If too loose you may need to add a dab of super glue to secure the tube to the bolt. If too tight, you can drill out the centre slightly more.
Print Settings:
Layer height: 0.12mm