1 / 1
Sovol Filament Dryer Bowden Tube Mod
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A hollow nut and bolt fastener to allow bowden tubes to pass through the Sovol SH01 Filament Dryer.
- Ocena
- 5 / 5
- Polubienia
- 22
- Pobrania
- 192
- Wydruki
- 3
- Wyświetlenia
- 1020
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 3) (Komentarze: 5)Remiksy (0)Kolekcje (39)Powiązane
Created for the Sovol SH01 Filament Dryer to allow smoother filament feeding through the top outputs.
A simple M6 nut and bolt fastener that is hollowed to accept 4mm bowden tube pass through (1.75mm filament).
The tube is press-fit, but your tolerances may vary. If too loose you may need to add a dab of super glue to secure the tube to the bolt. If too tight, you can drill out the centre slightly more.
Print Settings:
Layer height: 0.12mm