Simple Shower Shelf
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple shower shelf design, created to fit a larger number of shower gel and shampoo bottles.
- Rating
- 4.667 / 5
- Likes
- 220
- Downloads
- 436
- Makes
- 4
- Views
- 5,576
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Bathroom
- License
- Creative Commons — Attribution
***IMPORTANT***
This shelf design can be mounted on pipes with the diameter of approximately 22 mm or 1 inch. The distance between the pipe and the wall behind it needs to be at least 15 mm, otherwise you won't be able to install the holders on the pipe. The pictures of the model show an earlier version of the design. Due to design changes, which make the installation of the holder easier, the uploaded stl files differ slightly from the make on the picture. You can now choose between two holder versions, one with straight and one with cutout back line.
You will need to print all the files only once and all of them can be printed without supports. For the installation you will also need four M4x16 screws (ISO 4762) and four M4 hex nuts.
Installation
Insert the M4 nuts into the slots on the left holder part.
Proceed with installing the holder parts on the shower pipe, by inserting the screws into the right holder until they won't reach the nuts in the left holder. Gently tighten the screws, so the holders will stay firmly in place on the pipe.
Align the pins on the cases with the cutouts on the holders, and slide the cases in place. To finish the assembly place the bottom grids into the cases.
To minimize the visibility of layer lines, I have used Prusament Galaxy Black PLA for the visible parts, while I printed the holders from PETG, to increase the strength of the assembly.
I hope you will find this desing useful. Happy printing! :)