5X4 Reducer for Oneida Super Dust Deputy
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Customized version of https://www.thingiverse.com/thing:2015939. Designed to work as a reducer for Oneida Dust Deputy
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 92
- Makes
- 0
- Views
- 327
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Share Alike
Customized version of https://www.thingiverse.com/thing:2015939. This was designed to work as a reducer for the inlet of Oneida's 5" Super Dust Deputy. I designed this to fit internally to the opening to avoid having an internal step down and reduce turbulence. The reducer is sized to fit a 4" flex duct on the smaller end. This slips easily into the opening in the Super Dust Deputy as designed but is not sloppy. It can be secured with foil tape or a bead of sealant. You should print a test ring of the larger side to ensure fit in your cyclone.
I was unable to get the online Thingiverse customizer to work properly and ended up using OpenScad on my PC per this tutorial. https://www.dr-lex.be/3d-printing/customizer.html
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
.2
Infill:
38
Filament: Sunlu PETG Black
Notes:
Printed with a brim to aid in adhesion of the small contact area with the bed.
Category: Machine Tools