1 / 1
AtomRC Dolphin Motor Mount 19x19mm
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A better, reinforced motor mount
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 153
- Makes
- 0
- Views
- 485
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution
The AtomRC Dolphin motor mount is pretty weak, and barely glued in. This mount replaces the stock wooden one, with an insertable mount. There is an included 19x19mm plate which attaches via m3 bolts and screws into nuts on the mount.
Best to print with Nylon - I use PA6-GF with 5 walls, 5 top & bottom layers, and 25% honeycomb infill. If you can't do nylon then ASA/ABS, and if you can not print those, get a better printer ;) jk PETG will be fine too but I found that PETG tends to crack and split with parts with numerous holes that are subject to stress.