1 / 9
Grinding and cutting jig for Skelestruder 5mm shaft — image 1
1 / 9

Grinding and cutting jig for Skelestruder 5mm shaft

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Jig and support to help with cutting to length and grinding flats on the 5mm rod used for Skelestruder, and others…

Rating
0 / 5
Likes
1
Downloads
17
Makes
0
Views
248
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution

Jig and support to help with cutting to length and grinding flats on the 5mm rod used in the Skelestruder

  • do check the depth of the flats and location outside the guide
  • flat widths are 5 mm (instructions say flat width should be 4mm or greater)
  • the saw should be flush with the edge of slot towards the middle of the jig, this slot is 3mm wide

2019-03-07 Update

  • I uploaded a lower jig to speed up print time and use less material...
    • see "skele_rod_grinding_jig_lower.stl" in the thing files
  • used for grinding the flat parts I used my Proxxon 90 degree mount and dremel cutting disk to grind the flat parts and start the cut.
  • I ended up finishing the cut by putting the rod into a vise and using a hacksaw

Category: 3D Printer Parts

Tags