MacBook Laptop Stand [Updated]
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a MacBook stand with venting ports
- Rating
- 0 / 5
- Likes
- 17
- Downloads
- 131
- Makes
- 0
- Views
- 818
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
These stands are designed for the current 16in, 14in MacBook Pros and 15in MacBook Air. The laptop gap is 18mm, 17mm and 12.5mm respectively. The venting ports allow for air circulation from either side.
For those of you who are new to 3D printing, this will require supports turn on so the top of vent holes are supported. You will need to clear out the support material with pliers or push them through with a straight tool.
UPDATED: I lowered the walls to 90mm. The vent holes were increased in size. I recommend using organic supports for ease of removal. The OG stand was 125mm and left the files if you prefer taller walls.
Please checkout my other models on Printables