1 / 4
Tool belt hammer holder with magnet, and quicksquare holder.
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Tested and now seems to work good.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 89
- Makes
- 0
- Views
- 736
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
So, I did not find any good hammer holders out there - neither commercial nor DIY. But, Prusa to the rescue. And the quicksquare as well! Very useful while renovating my garage.
The hammer is fastened with a magnet - I use a 50mm by 20mm by 10mm neodymium. Sticks well.
The quicksquare is fastened with a twist hook.
Clips over pockets - back or front - possibly also on the belt, but I prefer them a bit lower.
Printed in PETG 0.3mm layers + 10° for better layer adhesion.