1 / 10
Cable Tie for USB, HDMI, DP, UTP and Power cables and more... — image 1
1 / 10

Cable Tie for USB, HDMI, DP, UTP and Power cables and more...

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Quick, <10 min, print to organise your cables. Cable ties are 120 to 320mm long and cost only 1,15 to 2.48 g of filament

Rating
4.533 / 5
Likes
483
Downloads
1,418
Makes
14
Views
5,851
Reviews
15

Updated at source:

Model information

Category
Organizers
License
Creative Commons — Attribution — Noncommercial — Share Alike

There are tons of cable ties to download, but none of them check all my boxes. I wanted a cable tie that can stay on the cable if desired, is easy to use, easy to print, and costs minimal filament. 

So I ended up designing one myself.

This cable tie is a quick and easy print without the need for supports or a brim and costs less than 1.146 grams of filament according to my slicer. On my small scale, the cable tie weighs 1.0 grams. This is for the smallest cable tie. It printed in 6 minutes and 33 seconds on my Bambu Labs X1C using NinjaTek Cheetah TPU.

Usage instructions: If you want to keep the tie connected to the cable, just fold over your USB cable and insert the round tab into the first hole. Then roll up the cable and use the desired hole to tie it together. It is not a problem if the tie is a little askew, as shown in the pictures; it will still work.

Print instructions: Print in flexible filament like TPU, with 3 walls, 3 bottom layers, 8 top layers and a 0.2 layer height. 

Edit: I have added more variants. There are cable ties for USB, 3.5 - 4 mm cables, and UTP and HDMI, 6.5 mm cables. I have also added two more lengths, medium, costing < 1.34 grams of filament and long, costing <1.47 grams of filament.

Edit2: Again I have added more variants. For thicker cables like power cables and new lengths.. The longest cable tie is now 320 mm, costing only 2.48 grams of filament.

Tags