QIDI X-Max 3 / X-Plus 3 camera mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Camera mount for the Qidi X-Max 3 and X-Plus 3
- Rating
- 5 / 5
- Likes
- 59
- Downloads
- 618
- Makes
- 2
- Views
- 3,883
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A camera mount for my QIDI X-Max 3 / X-Plus 3 printers.
Unfortunately the original is currently out of stock.
Other webcams from Logitech had a too narrow FOV or the housing was too big so they can only be placed on the back side (and get a lot of light by that where the video quality suffers).
I found a nice solution from @Kamerton_418898 here https://www.printables.com/de/model/618555-qidi-x-max-3-camera-mount
I thought it has a few downsides and created my own model from scratch that has:
- Camera light protection so that the LED stripe doesnt blind the camera lens (improved video quality)
- Screws on the bottom side, because there is limited space on the top side (and looks nicer for me)
- Protection caps so that the screws dont scratch the metall part of the printer
- Less parts (no nuts, additional screws and washers)
- Different mounting base so the angles etc. are slithgly different (fitted better for me)
If you like the model of @Kamerton_418898 more, please use his solutioon and he also might like an upvote :)
What you need:
- 2x M4 x 8mm screws (or longer)
- 1x M3 x 16mm screw (maximum 18mm long)
- Print: 2x_protection_cap.stl
- Print: base.stl
- Print: camera_bracked.stl
- Sunplus Camera (1080p 2.8mm lens) (eg. from here: https://de.aliexpress.com/item/1005005708348092.html )
Instructions:
- Just print in something temperature resistant like ASA/ABS or better.
- Assemble everything.
- Mount it on the front right side (like the original camera from qidi).