1 / 3
PRUSA Enclosure Mounted Filament Cutter
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This tool mounts and swivels around a screw hole on the enclosure. It holds an exacto blade inside for the cut.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 30
- Makes
- 1
- Views
- 536
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
This print requires these 3 parts: Square nut, Screw (10mm), X-acto Blade (19)
- First print the blade holder and the blade pin
- Insert the blade (pay attention to the orientation), blade pin, and the square nut.
- Print the blade cover, but make sure that the print pauses before it starts the top bridging layer, somewhere around 15.6mm, so you can insert the assembled blade holder.
- Mount it! :D