3/8 inch collar adapter Knife Sharpening Tool v2.1
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An adapter to use a 3/8" diameter tube in place of the 10mm tube for mounting knife sharpener feet.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 16
- Makes
- 0
- Views
- 226
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
The body of the knife sharpening tool v2.1 uses a 10mm tube. Since it's very hard to find metric tubing in the states, I ended up buying a 3/8 inch tube. The original plan says you should be able to get away with a 3/8 inch tube instead of a 10mm, but since 3/8 inches is 9.525mm, the feet slide from side to side and are free to rotate. Using 1 or 2 of these collars with an M3 captive nut and 6mm M3 bolt, the 3/8 inch tube can no longer rotate or slide. This makes the knife sharpener much more stable.
Category: Hand Tools