3/8 inch collar adapter Knife Sharpening Tool v2.1
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An adapter to use a 3/8" diameter tube in place of the 10mm tube for mounting knife sharpener feet.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 226
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
The body of the knife sharpening tool v2.1 uses a 10mm tube. Since it's very hard to find metric tubing in the states, I ended up buying a 3/8 inch tube. The original plan says you should be able to get away with a 3/8 inch tube instead of a 10mm, but since 3/8 inches is 9.525mm, the feet slide from side to side and are free to rotate. Using 1 or 2 of these collars with an M3 captive nut and 6mm M3 bolt, the 3/8 inch tube can no longer rotate or slide. This makes the knife sharpener much more stable.
Category: Hand Tools