1 / 3
Corolla EPS Steering Angle Sensor Spline mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Corolla EPS Steering Angle Sensor Spline mount
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 17
- Makes
- 0
- Views
- 187
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution
The spline mount should be printed with the hole in the middle slightly smaller than the diameter of the splines on the shaft of the corolla EPS motor. This will ensure the splines cut into the print so it can turn the steering angle sensor (SAS). The spacer holds the SAS perpendicular to the shaft when mounted so there should be minimal wear between the spline mount and the SAS where they interface.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
No
Resolution:
200
Infill:
20
Filament: Inland PETG
Category: Automotive