Wen Portable Bandsaw table

i got the wen bandsaw awhile back an picked it primarily because it was the cheapest i could find but have been really surprised with how well its worked an the quality for price but i found i wanted to use it alot more for smaller stuff than larger stuff so first i just come up with a way to hang it an make it stable enough to cut with while hanging but then i seen a few other ppl who had done the same while adding a larger table in place of the stop for the saw so by removing the stop u can put the table in its place using the same screws an t nut that was originally with the saw but if it doesnt fit u can swap them out an use a t nut from a 3d printer if need be but it should work with the original hardware now. if not let me know an i'll make the changes that are needed. its worked for me so far, only down side is u have to use something to pull the trigger, i use little strips of velcro an it makes it easy to remove if need be but i have a switch hooked up between it an the power card to turn it on an off so that will be something u have to deal with in your own way but if u have a power surger or power strip that should have a switch that will do the job for u, if u want something thats alittle nicer, wen sell a pedal that lets u turn it on an off with ur foot but im to cheap to buy something like that an just make my own.