1 / 2
21700 4s PD QC 100W Power Bank Enclosure — image 1
1 / 2

21700 4s PD QC 100W Power Bank Enclosure

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Adaptation of a power bank PCB from Aliexpress with all major quick charging protocols and cell balancing.

Rating
0 / 5
Likes
29
Downloads
204
Makes
1
Views
2,074
Reviews
0

Updated at source:

Model information

Category
Other Ideas
License
Creative Commons — Attribution — Share Alike

Adaptation of a power bank PCB from Aliexpress with all major quick charging protocols and cell balancing.

Holes are almost necessary. Heat output is around 10w in the worst case scenario.

Cells overheat at maximum charging power even with holes, black material color and passive airflow.

PETG or ABS/PC recommended. PCB reaches up to 70°C.

Screws are M3x10.

Doesn't use threaded inserts, since it's a one-time assembly.

Just search "100w pd power bank module" on AliExpress. There are dozens of them.

Step file attached. Stl's are lame.

Feel free to comment. Any criticism is welcome.

Printing Notes:

I recommend printing with supports only on the sides. Port holes can be left without them.
Alternative is using "Make Overhang Printable" in Cura. Alleviates the need of scraping off supports, but in the end it's less comfortable to use.

It's a function-driven design, eh. Gotta stop somewhere.

Tags