HP 27es vesa adapter 75x75
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€2.28 – €2.79 net (excluding VAT)
For file: vesa_adapter_hp_27es_0.4n_0.2mm_PETG.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €2.54 excluding VAT (range midpoint).
- Weight reported by the author
- 44 g
- Print time reported by the author
- 2.09 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A vesa adapter (75x75) for the HP 27es monitor.
- Rating
- 5 / 5
- Likes
- 9
- Downloads
- 207
- Makes
- 2
- Views
- 986
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Since the HP 27es doesn't have a vesa mount I made this adapter for it. It's compatible with 75x75 mounts with M4x12 screws (because they came with the arm I bought), if you need different screw holes let me know.
Print Settings
- Material: PETG or some other durable material
- Layer height: 0.2mm (higher should be fine (not tested) the important thing is good layer adhesion)
- Perimeters: 3 (it should be fine with 2 (not tested) but I really didn't want this thing to break)
- Infill: 20% adaptic cubic or 15% gyroid
- Supports: the bridging on the lower hole should be just fine but if you want to be extra sure and avoid sagging add some sopports there (the gcode I provided already has them)
If you find this model useful please like it :)