1954 Pontiac Chieftain Antenna Trim Piece Gasket
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Gasket for the antenna trim piece of a 54 Pontiac Chieftain. May also work for a 54 Chevy Bel Air (havent tested)
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 14
- Makes
- 1
- Views
- 109
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
My grandfather when he found out I had a 3d printer asked if I could print something flexible like a gasket. He quickly gave me a hand-drawn sketch of the base of the antenna trim piece. Apparently a gasket is required to prevent the paint from cracking when tightening the antenna. I used Inkscape to convert the drawing to a svg file then modified it on tinkercad. The outer rim is roughly 1/16" (~1.6mm) tall and the inner structure is about 1/8" (~3.2mm) tall.
Printed with 100% infill using Sunlu 95A TPU on a direct drive ender 3.
