1954 Pontiac Chieftain Antenna Trim Piece Gasket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Gasket for the antenna trim piece of a 54 Pontiac Chieftain. May also work for a 54 Chevy Bel Air (havent tested)
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 14
- Wydruki
- 1
- Wyświetlenia
- 109
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
My grandfather when he found out I had a 3d printer asked if I could print something flexible like a gasket. He quickly gave me a hand-drawn sketch of the base of the antenna trim piece. Apparently a gasket is required to prevent the paint from cracking when tightening the antenna. I used Inkscape to convert the drawing to a svg file then modified it on tinkercad. The outer rim is roughly 1/16" (~1.6mm) tall and the inner structure is about 1/8" (~3.2mm) tall.
Printed with 100% infill using Sunlu 95A TPU on a direct drive ender 3.
