1 / 2
Raspberry Pi Zero Sensor Stand (FreeCAD)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Remix to add space and mounting options for Adafruit BME 680 sensor. Also cutout behind RPi.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 31
- Makes
- 0
- Views
- 357
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
Model shown is approx. 85 mm tall. Uses 5mm standoffs and M2.5 x 12mm screws and M2.5 nuts.
Remove the power cable hole fillet and model is parametric.
Printed in PLA, 0.20mm, 15% infill, no supports (I printed face down). Approx 25 grams filament required.
Note: in my case -1 degF temp offset was applied due to sensor proximity to RPi.