1 / 2
Phone stand with Ikea Nordmärke wireless charger — image 1
1 / 2

Phone stand with Ikea Nordmärke wireless charger

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Horizontal phone stand for Ikea Nordmärke wireless charger.

Rating
0 / 5
Likes
3
Downloads
53
Makes
1
Views
274
Reviews
0

Updated at source:

Model information

Category
Office
License
Creative Commons — Attribution — Share Alike

A phone stand (horizontal) for Ikea Nordmärke wireless charger.

Assembly

There are 4 indents for anti-slip feet with a diameter of 8mm. Feel free to glue your preferred ones or use the model as is.

Print settings

  • PLA or other rigid filament
  • 0.4mm nozzle (0.6mm may work too)
  • 0.2mm layer height recommended
  • print in default orientation or flip the model on its side (with a cable hole facing the build plate)
  • add a brim if you are printing the model on its side (10mm+)
  • snug supports are preferred, organic may work as well
  • optional - block supports for feet indents

Tags