1 / 2
Phone stand with Ikea Nordmärke wireless charger — zdjęcie 1
1 / 2

Phone stand with Ikea Nordmärke wireless charger

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Horizontal phone stand for Ikea Nordmärke wireless charger.

Ocena
0 / 5
Polubienia
3
Pobrania
53
Wydruki
1
Wyświetlenia
274
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Office
Licencja
Creative Commons — Attribution — Share Alike

A phone stand (horizontal) for Ikea Nordmärke wireless charger.

Assembly

There are 4 indents for anti-slip feet with a diameter of 8mm. Feel free to glue your preferred ones or use the model as is.

Print settings

  • PLA or other rigid filament
  • 0.4mm nozzle (0.6mm may work too)
  • 0.2mm layer height recommended
  • print in default orientation or flip the model on its side (with a cable hole facing the build plate)
  • add a brim if you are printing the model on its side (10mm+)
  • snug supports are preferred, organic may work as well
  • optional - block supports for feet indents

Tagi