1 / 5
Sovol SV05 Print Surface Guide
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple guide for aligning the print surface
- Rating
- 5 / 5
- Likes
- 6
- Downloads
- 65
- Makes
- 1
- Views
- 259
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a simple guide for aligning the magnetic print surface to the bed. I decided I only required a corner for alignment. The guide uses the three existing holes in the bed, but I used longer M4 screws.
November 15, 2024:
I rarely use the entire print bed on the SV05 because I have a larger SV01. However, I discovered this guide interferes with the hotend if the print fills the maximum area. I reduced the height of the guide and now it clears the hotend (Print Surface Guide V2).
0.6mm nozzle, 0.3mm layer, PETG, Sovol SV01