1 / 5
Maintenance - Base (Roborock S8)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple maintenance base for laser-tower protection of vacuum robots. (designed to fit Roborock S8)
- Rating
- 5 / 5
- Likes
- 10
- Downloads
- 74
- Makes
- 1
- Views
- 732
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
For the regular maintenance of my Roborock S8 i needed a simple solution to protect the laser tower while the robot is laying upside down.
Technical Data:
- inner diameter: 90mm
- angle: 8°
- height at the lowest point: 22,5mm
Print settings:
- printed the base with normal PLA
- printed the dumper with TPU/FLEX
- no supports, 0.2mm layer height, no brim